THE ULTIMATE SOLAR CHARGE CONTROLLER

FOR YOUR 12V or 24V SYSTEM!

This incredible bit of gear is the Adventure Kings Plus 40 Amp MPPT Solar Charge controller! This 40 Amp solar charge controller is lithium compatible with dedicated multi-stage charging profiles for different battery types, has an advanced display that shows real time power stats and can accept up to 92V of solar input in standard conditions! It also offers a huge amount of customisation so it can suit just about any setup - AGM or lithium, up to 780 Watts as a 12 Volt battery system or 1,560 Watts as a 24 Volt battery system with a 40 Amp charge rating - and it has a 3 year warranty.

Able to accept up to 1.5 KiloWatts of Solar power

On the solar input side, it will make use of up to 520W of solar power as a 12V system and of up to 1,040W of solar power as a 24V system. It can also over power by 50%, meaning you can connect up to 780 Watts of solar panels when using this solar regulator as a 12 Volt system and a massive 1,560 Watt of solar panels when setting up a 24 Volt system. This is a super effective way of making the most in cloudy or low light conditions. With over 98% max conversion efficiency and less than 15 milliamps of standby power it’s able to efficiently and effectively charge your batteries!

ADVANCED, CUSTOMISABLE DISPLAY

TO KEEP AN EYE ON YOUR SYSTEM

Once connected you’ll see the Advanced Backlit LCD display light up and start to cycle through all your solar info - with data coming from your solar input on the top row, power going to your battery on the second row and any power being used by the load circuit on the bottom row. The screen will show volts, amps and watts coming from your solar panels, plus it’ll record the total amount of power the panels have supplied in watt hours too - ideal for permanent setups! The battery information shows battery voltage, charging current in Amps, ambient temperature at the sensor and battery capacity as a percentage.

THE PERFECT SIZE FOR JUST ABOUT ANY SETUP!

Measuring in at 255mm tall, 185mm wide and 68mm deep with a solid heat sink and 13 different built-in protection features including over power, short circuit, low temperature cutoff for lithium batteries and over temperature; it’s compact enough to use for a portable setup and ideal to use for permanent setups.