Details
Hercules 12V Impact Wrench | 480Nm of Torque | Incl Sockets | Forward/Reverse Gears
Huge 480Nm of punch – perfect for breaking loose seized nuts – includes 3.8m of cable with a 12V cig plug for power. Includes hard case and 17mm,19mm, 21mm, and 23mm impact sockets!
Easy, fast way to undo and tighten wheel nuts or other tight fasteners on any 4WD
Every 4WDer should keep one in their vehicle. These devices are really popular, because they make undoing your wheel nuts a quick and easy task!
The Hercules 12v Impact wrench uses a specially developed centrifugal two way clutch system. It can be powered from a 12V cig socket or direct from a 12V battery. Maximum torque output is 480Nm (250ft/lbs) which is greater than the torque settings of most wheel nuts. Many 4WD wheel nuts need an impacting action to undo them – that’s where the Hercules Impact Wrench comes in handy!
The Hercules 12V Impact Wrench kit contains:
Impact Wrench with 3.8m cable with cigarette lighter plug
Battery adaptor with alligator clips
Single hex impact sockets; 17/19 & 21/23mm
Spare fuses
Hub cap remover
Operation:
To loosen nuts, press and hold left hand side of switch until impacting action occurs
NOTE: there may be a delay of 3-5 seconds before initial impact occurs
It may take a few impacts to loosen very tight wheel nuts
If nuts are extremely tight start the vehicle’s engine
Press right hand of switch to tighten wheel nuts
Always check nuts with torque wrench to ensure adequate tension
To tighten nuts, press right hand of switch
Always check nuts with torque wrench to ensure correct torque specification as per your vehicle’s user manual
Hercules 12V Impact Wrench | 480Nm of Torque | Incl Sockets | Forward/Reverse Gears
MY IMPACT WRENCH ISN’T WORKING, WHAT’S GOING ON?
Unlike a usual impact driver, this one works by building up speed and momentum before impacting – hold the button down for a few seconds to allow the motor to spin up and it will strike.
HOW TO USE IT
Simply plug the alligator clips onto your battery, choose the correct socket and press the switch to spin up the motor and impact the nut or bolt. Holding the other side of the switch will spin the wrench in the opposite direction.
WILL THIS ONLY WORK FOR WHEELS?
No, the Herclues Impact Wrench has enough torque to undo many nuts and bolts on your vehicle.
WHAT SIZE SOCKETS DOES IT COME WITH
It comes with double sided impact sockets, one 17/19mm and one 21/23mm.
CAN I USE MY OWN SOCKETS
Yes, if you’re using a different size socket that does not come with the kit ensure it is impact rated and uses a ½ inch drive.
HOW MUCH TORQUE DOES IT HAVE
Max torque of 480NM
