This is the Adventure Kings 12V control Box – a feature packed bit of gear that will make anyone’s 12V setup better! If you’ve been dreaming of an epic camping 12v system, then this is the bit of gear you’ve been waiting for. An ultra-premium quality product, without the premium price tag!
First, the box itself is built with laser cut 1.5mm powder coated aluminium and the lid is 2mm thick for strength. Coming in at 400mm by 305mm and 80mm deep, it’s compact enough to fit just about anywhere while still providing plenty of room for all the switches, wiring and 12v gear.
Going from the outside in, there’s a grommet on each side which makes it easy to position and wire this up, no matter where you want to mount it.
On the front you’ll notice the space at the top left, along with the extra grommet – this space is designed so you can mount a DCDC charger directly onto the box – feed the wiring through the grommet and you can wire up to the internal posts for an all-in-one install.
Next up there’s an easy to access fuse holder – these fuses run the switches, plugs and sockets that run along the bottom of the control box.
From left to right you’ve got 2 quick connect plugs – the first can be easily configured as a solar input for your DCDC charger. Then there’s a voltmeter, three 20A-rated cig sockets and a double USB socket with 1amp and 2.1amp USB connections.
Above that you’ll see 5 x 16Amp rated rocker switches – these are pre wired with fused power so you can easily switch any added accessories and circuits on and off. You even get a sheet of pre-labelled stickers to customise your setup for your own needs!
The face screws off and inside you’ve got a negative bus bar and negative M10 binding post as well as two positive binding posts for your starter and auxiliary batteries. That means wiring up both batteries for a dual battery system is easy!
With heavy duty wiring the Adventure Kings 12V control box is ready to go – all you need to do is add fused power from your battery. Plus because it uses ring and spade terminals, it’s easy to modify, upgrade or update the whole setup as you go. Whether it’s changing the quick connect plug to become your DCDC charger’s solar input, or using the switches to trigger relays and run all your vehicle’s camp lighting and 12V accessories.
The Adventure Kings 12V control box will take your 12V setup to the next level – whether you’re using it as a power hub directly off your deep cycle battery, or connecting a dual battery system complete with a DCDC charger.
The most affordable, feature-packed 12v accessory panel on the market!
The Adventure Kings 12v Accessory Panel is the best way to access your camping 12v system’s battery power.
This beaut all-in-one accessory panel features two standard-sized cig sockets, a pair of USB outlets for device charging and an in-built LED voltmeter.
It’s perfect for installing into the front panel of Titan storage drawer side wings, or custom mounting as part of your 12v setup.
Run fridges, camp lights, air compressors and more, charge USB-powered gear like phones, tablets and Bluetooth speakers and easily keep an eye on how much battery you’ve got left, all in one neat panel!
It features twin 10A fused circuits to protect your electrical accessories and has recessed screw holes in each corner for neat fitment.
Add the Adventure Kings 12v Accessory Panel to your drawers or storage setup and make powering all your electrical gear super easy!
*NOTE: A minimum of 90mm of space is required behind any mounting surface to properly mount the accessory panel
Box Material: |
Black powder coated laser cut aluminium |
Box Size: |
400 x 305 x 80mm |
Weight: |
2.74kg |
Lid Thickness: |
2mm |
Box Thickness: |
1.5mm |
DCDC Charger: |
Provisions for CTEK D250SA or Kings DCDC Charger |
Coating: |
Black Powder Coating |
Recommended Fuse Size for Batteries: |
40A (Input cable from vehicle’s battery needs to be fused as close as possible to the battery using a 40A inline fuse or circuit breaker) |
Recommended Cable Size for Batteries Depending on Length: |
0-1m = 8 Gauge Battery Cable 1-3m = 6 Gauge Battery Cable |
Voltmeter Type |
Digital LED |
12v Sockets |
2 x standard cig sockets to suit fridges etc |
USB Sockets |
1 x 2.1A fast charging, 1 x 1A |
Face Panel |
3mm alloy |
Fuses |
4 – 2 x 10A fuses on cig circuits, 5A fuses on USB and voltmeter circuits |
Dimensions |
210mm (H) x 50mm (W) |
Required Depth |
90mm behind mounting surface |
SKU | SC-CO-CONTROLBOX-12VPANEL |
---|---|
Manuals and Documentation | No |
This is the Adventure Kings 12V control Box – a feature packed bit of gear that will make anyone’s 12V setup better! If you’ve been dreaming of an epic camping 12v system, then this is the bit of gear you’ve been waiting for. An ultra-premium quality product, without the premium price tag!
First, the box itself is built with laser cut 1.5mm powder coated aluminium and the lid is 2mm thick for strength. Coming in at 400mm by 305mm and 80mm deep, it’s compact enough to fit just about anywhere while still providing plenty of room for all the switches, wiring and 12v gear.
Going from the outside in, there’s a grommet on each side which makes it easy to position and wire this up, no matter where you want to mount it.
On the front you’ll notice the space at the top left, along with the extra grommet – this space is designed so you can mount a DCDC charger directly onto the box – feed the wiring through the grommet and you can wire up to the internal posts for an all-in-one install.
Next up there’s an easy to access fuse holder – these fuses run the switches, plugs and sockets that run along the bottom of the control box.
From left to right you’ve got 2 quick connect plugs – the first can be easily configured as a solar input for your DCDC charger. Then there’s a voltmeter, three 20A-rated cig sockets and a double USB socket with 1amp and 2.1amp USB connections.
Above that you’ll see 5 x 16Amp rated rocker switches – these are pre wired with fused power so you can easily switch any added accessories and circuits on and off. You even get a sheet of pre-labelled stickers to customise your setup for your own needs!
The face screws off and inside you’ve got a negative bus bar and negative M10 binding post as well as two positive binding posts for your starter and auxiliary batteries. That means wiring up both batteries for a dual battery system is easy!
With heavy duty wiring the Adventure Kings 12V control box is ready to go – all you need to do is add fused power from your battery. Plus because it uses ring and spade terminals, it’s easy to modify, upgrade or update the whole setup as you go. Whether it’s changing the quick connect plug to become your DCDC charger’s solar input, or using the switches to trigger relays and run all your vehicle’s camp lighting and 12V accessories.
The Adventure Kings 12V control box will take your 12V setup to the next level – whether you’re using it as a power hub directly off your deep cycle battery, or connecting a dual battery system complete with a DCDC charger.
The most affordable, feature-packed 12v accessory panel on the market!
The Adventure Kings 12v Accessory Panel is the best way to access your camping 12v system’s battery power.
This beaut all-in-one accessory panel features two standard-sized cig sockets, a pair of USB outlets for device charging and an in-built LED voltmeter.
It’s perfect for installing into the front panel of Titan storage drawer side wings, or custom mounting as part of your 12v setup.
Run fridges, camp lights, air compressors and more, charge USB-powered gear like phones, tablets and Bluetooth speakers and easily keep an eye on how much battery you’ve got left, all in one neat panel!
It features twin 10A fused circuits to protect your electrical accessories and has recessed screw holes in each corner for neat fitment.
Add the Adventure Kings 12v Accessory Panel to your drawers or storage setup and make powering all your electrical gear super easy!
*NOTE: A minimum of 90mm of space is required behind any mounting surface to properly mount the accessory panel
Box Material: |
Black powder coated laser cut aluminium |
Box Size: |
400 x 305 x 80mm |
Weight: |
2.74kg |
Lid Thickness: |
2mm |
Box Thickness: |
1.5mm |
DCDC Charger: |
Provisions for CTEK D250SA or Kings DCDC Charger |
Coating: |
Black Powder Coating |
Recommended Fuse Size for Batteries: |
40A (Input cable from vehicle’s battery needs to be fused as close as possible to the battery using a 40A inline fuse or circuit breaker) |
Recommended Cable Size for Batteries Depending on Length: |
0-1m = 8 Gauge Battery Cable 1-3m = 6 Gauge Battery Cable |
Voltmeter Type |
Digital LED |
12v Sockets |
2 x standard cig sockets to suit fridges etc |
USB Sockets |
1 x 2.1A fast charging, 1 x 1A |
Face Panel |
3mm alloy |
Fuses |
4 – 2 x 10A fuses on cig circuits, 5A fuses on USB and voltmeter circuits |
Dimensions |
210mm (H) x 50mm (W) |
Required Depth |
90mm behind mounting surface |
SKU | SC-CO-CONTROLBOX-12VPANEL |
---|---|
Manuals and Documentation | No |
Facebook
Adventure Kings NZ
Instagram
@adventurekingsnz
Get all the latest information on Events, Sales and Offers. Sign up for newsletter today.