The Adventure Kings Awning with its built-in Strip Light is the ultimate multi-purpose set up! Not only does it offer shade and shelter from any weather, the built-in LED light means you can light up your campsite in seconds.
With UPF50+ rated waterproof 170GSM ripstop polyester built to withstand Aussie conditions, this awning also features telescopic anodised alloy poles and alloy (not plastic) hinges for strength.
On top of that, the internal LED light provides plenty of light and even includes a handy adjustable dimmer switch so you can choose to fully light up your whole area, or save battery power by lowering the output.
Unlike some awnings on the market, the entire range of premium Adventure Kings side Awnings feature a dual channel system that makes set up and pack up incredibly fast and easy – thanks to the dual channel design. The first time you use your awning, simply set the vertical poles to the correct length and from then every time you’re setting up or packing down your camp you can fold them in and out of the frame without having to adjust their length! Rain or shine you just can’t beat an awning that sets up in seconds, and packs up just as fast!
The entire awning assembly packs securely away into a heavy-duty nylon reinforced PVC bag and mounts to virtually any vehicle with a set of roof racks.
Finally, all Adventure Kings Awnings with built in LED Strip Lights also include a DIY fitting kit at no extra cost – making them suitable for virtually any vehicle with a pair of roof racks, or somewhere to mount to – whether it’s a ute, wagon, van, canopy or trailer!
Quick and easy enough to set up for a trackside lunch stop and tough enough to survive a week of wet weather – throw in a bright and adjustable LED light and you can see why an Adventure Kings 2 in 1 Awning is the perfect choice for any setup, any time of the year!
The Strip Light is mounted using the Awning’s sail track. For this reason, users will not be able to use an Awning Tent & Strip Light simultaneously.
Please note: The awning is 2m along the vehicle and comes out 2.5m from the vehicle once the awning has been rolled out.
Planning a beach camping adventure or love beach daytrips? Then you need the genuine Aussie-made Ground Grabba Lite sand pegs from 4WD Supacentre – the best way to secure your awning, swag, tent, tarp or gazebo when you’re out on the sand!
These cracking sand pegs are made from glass-reinforced nylon and feature a clever spiral design that spreads out wide into the sand as they enter. Unlike normal sand pegs that struggle in soft sand, Ground Grabba Lites bite into the sand for serious securing power!
They measure 400mm in length, so you can really drive them down deep for extra strength. Ground Grabba Lites work best on medium to hard compact sand. If you’re camped on dry, soft sand, simply clear away a bit of sand and dig down until it gets firmed, to give you a good surface to dig into.
Ground Grabba Lites can be installed into soft sand by hand, or with the use of a drill. If installing them by hand, push down with firm pressure and use the hook as a handle to help you twist them as you go. The more pressure you put on them as you drive them into the ground, the better they’ll bite!
Got a cordless drill with a rating of at least 60Nm? Then grab yourself a square bit driver and a 19mm socket, and you’ve got the ultimate way to drive your Ground Grabba Lites into the ground!
Unlike normal pegs, Ground Grabba Lites don’t need to be fully buried to work. Leave the top exposed just enough to get your guy rope on the hook, adjust and you’re good to go!
Don’t let your awning get caught and destroyed by the wind, and don’t struggle to put up your tent or swag – score a set of the genuine Ground Grabba Lite sand pegs from 4WD Supacentre and make your next beach adventure the best one ever!
Comes with a full one-year warranty. A quality Australian-made product!
NOTE: Only use a drill and NOT a cordless impact wrench to install Ground Grabba Lites into soft sand. An impact wrench may cause damage to the Ground Grabba Lites and may void warranty.
Material: |
170GSM Ripstop Polyester |
Poles: |
Anodised Aluminium Alloy |
Knuckles: |
Cast Aluminium Alloy |
Storage Bag: |
Nylon-Reinforced Heavy-Duty PVC |
UPF: |
50+ |
Awning Dimensions (m): |
2 x 2.5 |
Lighting Colour: |
Cool White |
Operating Voltage: |
12V DC |
Low Power Consumption: |
0.4A-1.1A (11.52W-28.8W Power depends on the current input values) |
Lumens: |
1200Im (the maximum brightness is equivalent to a 40W fluorescent tube) |
LED Strip Waterproof Rating: |
IP65 |
Strip Light Dimensions (mm): |
(L)1300 x (W)55 x (D)3 |
Strip Light Weight: |
420g |
Cable: |
5.0m |
Switch: |
Adjustable Dimmer |
Connector: |
Cig Socket |
Weight: |
9.50kg |
Length: |
400mm |
Material: |
Glass-reinforced nylon |
Max flight (spiral) width: |
48mm |
Max shaft thickness: |
15mm |
Hex head: |
19mm |
Weight: |
170 grams |
SKU | SC-CO-AWNSTRIP2X2.5-2XGGRAB |
---|---|
Manuals and Documentation | No |
The Adventure Kings Awning with its built-in Strip Light is the ultimate multi-purpose set up! Not only does it offer shade and shelter from any weather, the built-in LED light means you can light up your campsite in seconds.
With UPF50+ rated waterproof 170GSM ripstop polyester built to withstand Aussie conditions, this awning also features telescopic anodised alloy poles and alloy (not plastic) hinges for strength.
On top of that, the internal LED light provides plenty of light and even includes a handy adjustable dimmer switch so you can choose to fully light up your whole area, or save battery power by lowering the output.
Unlike some awnings on the market, the entire range of premium Adventure Kings side Awnings feature a dual channel system that makes set up and pack up incredibly fast and easy – thanks to the dual channel design. The first time you use your awning, simply set the vertical poles to the correct length and from then every time you’re setting up or packing down your camp you can fold them in and out of the frame without having to adjust their length! Rain or shine you just can’t beat an awning that sets up in seconds, and packs up just as fast!
The entire awning assembly packs securely away into a heavy-duty nylon reinforced PVC bag and mounts to virtually any vehicle with a set of roof racks.
Finally, all Adventure Kings Awnings with built in LED Strip Lights also include a DIY fitting kit at no extra cost – making them suitable for virtually any vehicle with a pair of roof racks, or somewhere to mount to – whether it’s a ute, wagon, van, canopy or trailer!
Quick and easy enough to set up for a trackside lunch stop and tough enough to survive a week of wet weather – throw in a bright and adjustable LED light and you can see why an Adventure Kings 2 in 1 Awning is the perfect choice for any setup, any time of the year!
The Strip Light is mounted using the Awning’s sail track. For this reason, users will not be able to use an Awning Tent & Strip Light simultaneously.
Please note: The awning is 2m along the vehicle and comes out 2.5m from the vehicle once the awning has been rolled out.
Planning a beach camping adventure or love beach daytrips? Then you need the genuine Aussie-made Ground Grabba Lite sand pegs from 4WD Supacentre – the best way to secure your awning, swag, tent, tarp or gazebo when you’re out on the sand!
These cracking sand pegs are made from glass-reinforced nylon and feature a clever spiral design that spreads out wide into the sand as they enter. Unlike normal sand pegs that struggle in soft sand, Ground Grabba Lites bite into the sand for serious securing power!
They measure 400mm in length, so you can really drive them down deep for extra strength. Ground Grabba Lites work best on medium to hard compact sand. If you’re camped on dry, soft sand, simply clear away a bit of sand and dig down until it gets firmed, to give you a good surface to dig into.
Ground Grabba Lites can be installed into soft sand by hand, or with the use of a drill. If installing them by hand, push down with firm pressure and use the hook as a handle to help you twist them as you go. The more pressure you put on them as you drive them into the ground, the better they’ll bite!
Got a cordless drill with a rating of at least 60Nm? Then grab yourself a square bit driver and a 19mm socket, and you’ve got the ultimate way to drive your Ground Grabba Lites into the ground!
Unlike normal pegs, Ground Grabba Lites don’t need to be fully buried to work. Leave the top exposed just enough to get your guy rope on the hook, adjust and you’re good to go!
Don’t let your awning get caught and destroyed by the wind, and don’t struggle to put up your tent or swag – score a set of the genuine Ground Grabba Lite sand pegs from 4WD Supacentre and make your next beach adventure the best one ever!
Comes with a full one-year warranty. A quality Australian-made product!
NOTE: Only use a drill and NOT a cordless impact wrench to install Ground Grabba Lites into soft sand. An impact wrench may cause damage to the Ground Grabba Lites and may void warranty.
Material: |
170GSM Ripstop Polyester |
Poles: |
Anodised Aluminium Alloy |
Knuckles: |
Cast Aluminium Alloy |
Storage Bag: |
Nylon-Reinforced Heavy-Duty PVC |
UPF: |
50+ |
Awning Dimensions (m): |
2 x 2.5 |
Lighting Colour: |
Cool White |
Operating Voltage: |
12V DC |
Low Power Consumption: |
0.4A-1.1A (11.52W-28.8W Power depends on the current input values) |
Lumens: |
1200Im (the maximum brightness is equivalent to a 40W fluorescent tube) |
LED Strip Waterproof Rating: |
IP65 |
Strip Light Dimensions (mm): |
(L)1300 x (W)55 x (D)3 |
Strip Light Weight: |
420g |
Cable: |
5.0m |
Switch: |
Adjustable Dimmer |
Connector: |
Cig Socket |
Weight: |
9.50kg |
Length: |
400mm |
Material: |
Glass-reinforced nylon |
Max flight (spiral) width: |
48mm |
Max shaft thickness: |
15mm |
Hex head: |
19mm |
Weight: |
170 grams |
SKU | SC-CO-AWNSTRIP2X2.5-2XGGRAB |
---|---|
Manuals and Documentation | No |
Facebook
Adventure Kings NZ
Instagram
@adventurekingsnz
Get all the latest information on Events, Sales and Offers. Sign up for newsletter today.